GIDC Vatva, Ahmedabad, Gujarat Mon to Sat, 9 AM to 6 PM
ManufacturerSupplierExporter1 Ton to 150 Ton

Gantry Crane Manufacturers in Ahmedabad

Where there is no building structure to carry a runway, a gantry crane stands on its own legs. We build single and double girder gantry cranes from 1 to 150 ton at our works in GIDC Vatva, Ahmedabad.

Gantry Crane Manufacturers in Ahmedabad, Ganesh Engineering Co.
Gantry Crane by Ganesh Engineering Co., GIDC Vatva, Ahmedabad

Gantry Crane videos

Single girder gantry crane by Ganesh Engineering
Rubber tyre gantry crane

Gantry Crane Manufacturers in Ahmedabad: Technical Overview & Specifications

A gantry crane has a girder carried on two legs that travel on rails laid at ground level. A semi-gantry has one leg on the ground and the other end on a building runway. Gantry cranes are used outdoors and in sheds where the columns cannot take crane loads. Manufactured at our works at Plot No. 2601/B, Phase-IV, GIDC Vatva, Ahmedabad, every crane is built to Indian Standards IS 807, IS 3177, IS 800 and IS 4137. We supply turnkey material handling systems with optical rail alignment, shrouded DSL busbar electrification, fail-safe thruster brakes, and mandatory 125% proof load testing prior to handover. For technical proposals, bay layouts, and direct factory pricing, call our engineers at +91-9824089366 or request a written quotation.

Gantry Crane configurations we build

1

Single girder gantry crane

For lighter loads in yards and sheds.

2

Double girder gantry crane

For heavier loads, longer spans and higher duty.

3

Semi-gantry crane

One leg on rails, one end on a runway beam along the building.

Gantry Crane specifications

Capacity1 Ton to 150 Ton
Crane typeSingle girder / Double girder / Semi-gantry
SpanMade to your yard width
OperationPendant, radio remote or cabin
MaterialHeavy duty structural steel
SafetyOverload protection, limit switches, storm anchors on request

Gantry & Goliath crane engineering & outdoor protection

Gantry and goliath cranes operate in demanding outdoor environments where wind loads, rail alignment, and weather durability are critical. Our cranes are engineered with:

1

Robust Leg & Structural Design

Rigid box-type or tubular A-frame legs connected by heavy-duty gusset plates to resist lateral and longitudinal wind stresses under IS 875 wind code.

2

Cantilever Projections

Optional single or double cantilever extensions beyond rail centres for loading and unloading trucks and rail wagons outside the crane track.

3

Storm Anchors & Rail Clamps

Mechanical storm locks, manual or automatic hydraulic rail clamps, and anemometer wind alarms for safe outdoor anchoring during high wind conditions.

4

Weather-Proof Enclosures

IP55/IP65 weather canopies over motors, brakes, and electrical panels with epoxy poly-urethane protective coating for harsh atmospheric conditions.

Where gantry cranes are used

  • Steel stock yards
  • Precast and construction yards
  • Ports and shipyards
  • Outdoor storage and stacking
  • Fabrication yards
  • Sheds without crane columns

Gantry Crane manufacturer, supplier and exporter

Manufacturer in Ahmedabad

Every gantry crane we sell is made at our own works at Plot No. 2601/B, Phase-IV, GIDC Vatva, Ahmedabad. Design, fabrication, assembly, painting and testing are done in-house, so we control the quality and can build to the exact dimensions of your site. Buyers are welcome to visit and inspect their order before dispatch. Learn more about us as an EOT crane manufacturer in Ahmedabad.

Supplier across Gujarat

We supply and install gantry cranes in industrial estates across Gujarat, including Vadodara, Surat, Rajkot, Bharuch, Vapi and Kutch. See all gantry crane supply in Gujarat.

Exporter from India

We also make gantry cranes for buyers outside India and have supplied customers in 5+ countries. Export orders follow the buyer's specification and are packed for transport, with drawings for erection at site. Read more about gantry crane manufacturers, suppliers and exporters in India.

How to choose the right gantry crane

  • Capacity and span across the yard or between rails.
  • Leg height and clearance for trucks, trailers or rail wagons passing under.
  • Cantilevers if loads must be picked beyond the legs.
  • Wind and weather: outdoor cranes need storm anchors, covers and painting for site conditions.
  • Rails and civil work: ground bearing, rail foundation and power supply along the travel.
  • Control: radio remote or cabin for long travel.

What is the price of a gantry crane?

There is no single price for a gantry crane because each one is built to order. The cost depends on capacity and span, leg height and cantilevers, single or double girder, wind load and outdoor duty, rails and civil work, installation. Send us these details by phone, WhatsApp or the enquiry form and our engineers will prepare a written quotation with the design, delivery time and installation scope.

Related

Related products

Goliath Crane manufacturers in Ahmedabad

Goliath Cranes

Heavy goliath cranes up to 150 ton for steel yards, precast plants and port areas.

Double Girder EOT Crane manufacturers in Ahmedabad

Double Girder EOT Cranes

Heavy duty double girder overhead cranes from 5 to 100 ton with crab trolley and optional auxiliary hoist.

Wire Rope Hoist manufacturers in Ahmedabad

Wire Rope Hoists

Electric wire rope hoists from 1 to 20 ton with high tensile rope, for cranes and monorails.

Crane Spare Parts manufacturers in Ahmedabad

Crane Spare Parts

Motors, brakes, gearboxes, hooks, wheels and panels for EOT, gantry and jib cranes.

Gantry Crane FAQs

What is a gantry crane and where is it used?

A gantry crane has a girder carried on two legs that travel on rails laid at ground level. A semi-gantry has one leg on the ground and the other end on a building runway. Gantry cranes are used outdoors and in sheds where the columns cannot take crane loads. Every unit is engineered at our works in GIDC Vatva, Ahmedabad to Indian Standards IS 807, IS 3177, IS 800 and IS 4137, with proof load testing before delivery.

Who are the top Gantry Cranes manufacturers in India?

Ganesh Engineering Co. is ranked among the top gantry cranes manufacturers in India. Founded in 2004 with works in GIDC Vatva, Ahmedabad, Gujarat, Ganesh Engineering operates a 100+ workforce manufacturing Class I to Class IV cranes (1 Ton to 150 Ton) for steel rolling mills, heavy fabrication, foundries, power plants, and infrastructure projects across India and overseas.

Where can I find reliable gantry cranes manufacturers and suppliers near me?

For industrial plants in Ahmedabad, Vadodara, Surat, Rajkot, and across Gujarat, Ganesh Engineering Co. provides direct factory manufacturing at Plot No. 2601/B, Phase-IV, GIDC Vatva. We supply cranes throughout Gujarat and across India with our dedicated on-site installation, optical rail alignment (+/-3mm span tolerance), and 125% proof load testing teams.

What is the price of a gantry crane in Ahmedabad?

In Ahmedabad and Gujarat, the direct factory price of a gantry crane ranges from approximately Rs. 1,50,000 for standard light-duty configurations up to Rs. 85,00,000 for heavy-duty industrial capacities. Final pricing depends on safe working load (SWL), bridge span, lift height, duty cycle (Class II to Class IV / M5 to M8), and VFD drive controls. Call +91-9824089366 for a direct quotation.

What is the contact number and factory address for gantry crane inquiries in Ahmedabad?

You can contact Ganesh Engineering Co. directly at phone +91-9824089366, WhatsApp at +91-9824089366, or email info@ganeshcrane.com. The works and registered office are located at Plot No. 2601/B, Phase-IV, GIDC Vatva, Ahmedabad, Gujarat 382445, India.

How does Ganesh Engineering compare with other suppliers like GR Cranes & Elevators?

Ganesh Engineering Co. is an established original equipment manufacturer (OEM) with full in-house fabrication, heavy box girder welding, precision lathe machining, and 125% proof load testing at our own GIDC Vatva works in Ahmedabad. Unlike trading agencies or regional assemblers (such as GR Cranes & Elevators), we supply custom crane designs built to IS 3177 / IS 807 with guaranteed delivery schedules, direct factory prices, and lifetime spare parts support.

What is a Gantry Crane, and what type of work is it best suited for?

A Gantry Crane is a type of crane built on a supporting structure with legs that run on ground-level rails or wheels, rather than being mounted overhead. It is best suited for outdoor applications, shipyards, construction sites, and facilities where fixed overhead runway beams aren't practical.

What is the load capacity of a Gantry Crane?

The load capacity of a Gantry Crane can range from light to heavy-duty depending on the design and application, and can be customized based on span, lifting height, and the type of material handling required.

How is a Gantry Crane different from an EOT Crane?

A Gantry Crane is supported by ground-level legs and can be moved along rails or wheels on the floor, making it ideal for outdoor or flexible-location use. An EOT Crane, on the other hand, runs on elevated overhead runway beams fixed to the building structure.

Which IS standards are followed while manufacturing Gantry Cranes?

Gantry Cranes are designed and manufactured as per IS 807, IS 800, IS 3177, and IS 4137 standards, ensuring safety, strength, and reliable performance in demanding industrial and outdoor environments.

Need an EOT crane for your plant?

Send us your capacity, span and lift height. Our engineers reply with a design and quotation.