EOT Crane videos
What is an EOT crane?
An EOT crane runs on rails fixed along the length of a shed. A bridge girder spans the bay, and a hoist trolley moves across the girder, so the hook can reach almost any point on the shop floor. Long travel, cross travel and hoisting are all motor driven and controlled from a pendant, a radio remote or an operator cabin.
EOT Crane configurations we build
Single girder EOT crane
One box or rolled-section girder with an underslung or top-running hoist. Lighter, quicker to install and easier on the building structure. We build these from 1 to 20 ton.
Double girder EOT crane
Two girders with a crab trolley running on top. Gives more hook height, longer spans and higher duty. We build these from 5 to 100 ton.
Cranes with auxiliary hoist
A second, faster hoist on the same crab for lighter lifts, common in fabrication and machine shops.
EOT Crane specifications
| Capacity | 1 Ton to 100 Ton |
|---|---|
| Crane type | Single girder / Double girder |
| Span | Made to your bay width |
| Operation | Electric, pendant or radio remote |
| Material | Heavy duty structural steel |
| Safety | Overload protection, limit switches |
| Design standards | IS 807, IS 800, IS 3177, IS 4137 |
IS 3177 / IS 807 duty classification guide
Electric overhead travelling cranes are categorised into duty classes based on daily operational hours, load spectrum, and lifting cycles. Ganesh Engineering designs each crane precisely to your operational class:
| Duty Class | IS 3177 / FEM | Typical Application | Daily Working Hours | Recommended Build |
|---|---|---|---|---|
| Class I | M3 / FEM 1Bm | Maintenance shops, pump houses, standby lifting | 1 to 2 Hours | Single girder EOT crane with standard hoist |
| Class II | M5 / FEM 2m | General engineering, machine shops, warehouses | 2 to 4 Hours | Single or double girder EOT crane |
| Class III | M7 / FEM 3m | Heavy fabrication yards, foundries, steel stockyards | 4 to 8 Hours | Double girder EOT crane with heavy-duty crab |
| Class IV | M8 / FEM 4m | Steel melting shops, continuous rolling mills, power plants | 8 to 24 Hours (Continuous) | Heavy double girder with auxiliary hoist & cabin control |
Core engineering components & safety mechanisms
Bridge Girder Construction
Fabricated box girder or rolled steel beam designed to IS 800 and IS 807. Deflection ratio strictly maintained within 1/750 to 1/1000 of span under full safe working load.
End Carriages & Wheels
Heavy forged EN-8 / EN-9 carbon steel double-flanged wheels mounted on anti-friction spherical roller bearings in L-type bearing blocks with rubber buffers.
Hoisting Machinery & Wire Rope
Precision-machined grooved steel wire rope drum. High-tensile steel wire rope (6×36 / 6×37 construction) and forged steel shank hook with safety latch (IS 3815).
Braking & Drive Systems
Fail-safe electro-hydraulic thruster brakes on hoisting, cross travel, and long travel motions. S4/S5 crane-duty induction motors with Class F insulation (IP55 protection).
Electrical & Control Protection
Rotary geared limit switches for hoisting, cross/long travel two-way lever limit switches, electronic overload protection with digital display, and VFD step-less acceleration.
EOT Cranes for industries in Vadodara
Industrial areas we cover in and around Vadodara
- Makarpura GIDC
- Savli GIDC
- Nandesari
- Waghodia
- Halol nearby
Vadodara is about 115 km by road from our works. The EOT crane is fabricated and tested in Ahmedabad, dispatched in sections and assembled at your site by our installation team.
EOT Crane manufacturer, supplier and exporter
Manufacturer in Ahmedabad
Every EOT crane we sell is made at our own works at Plot No. 2601/B, Phase-IV, GIDC Vatva, Ahmedabad. Design, fabrication, assembly, painting and testing are done in-house, so we control the quality and can build to the exact dimensions of your site. Buyers are welcome to visit and inspect their order before dispatch. Learn more about us as an EOT crane manufacturer in Ahmedabad.
Supplier across Gujarat
We supply and install EOT cranes in industrial estates across Gujarat, including Vadodara, Surat, Rajkot, Bharuch, Vapi and Kutch. See all EOT crane supply in Gujarat.
Exporter from India
We also make EOT cranes for buyers outside India and have supplied customers in 5+ countries. Export orders follow the buyer's specification and are packed for transport, with drawings for erection at site. Read more about EOT crane manufacturers, suppliers and exporters in India.
How to choose the right EOT crane
- Capacity: your heaviest regular lift, including slings, spreaders and lifting tackle.
- Span and runway: the distance between rail centres and the length the crane must travel.
- Lift height and headroom: the clear height under the roof decides single girder, low headroom or double girder.
- Duty: how many hours a day the crane runs and how many lifts per hour.
- Building: column and gantry girder strength to carry wheel loads.
- Control: pendant, radio remote or cabin, and whether you need VFD for smooth starts.
What is the price of an EOT crane in Vadodara?
There is no single price for an EOT crane because each one is built to order. The cost depends on safe working load and span, lift height and hook approach, duty class and hours of use per day, speeds and vfd control, single or double girder build, gantry rails and installation scope. Send us these details by phone, WhatsApp or the enquiry form and our engineers will prepare a written quotation with the design, delivery time and installation scope.
