Single Girder EOT Crane videos
What is a single girder EOT crane?
A single girder EOT crane uses one main girder between two end carriages. The hoist usually runs on the bottom flange of the girder. Because there is only one girder, the crane weighs less, puts lower loads on the building columns and costs less than a double girder crane of the same capacity.
Single Girder EOT Crane configurations we build
Underslung hoist
Wire rope hoist runs below the girder. The most common build for 1 to 10 ton.
Low headroom hoist
Hoist body sits beside the girder to gain hook height in sheds with a low roof.
Box girder design
Fabricated box girder for longer spans and stiffer deflection limits.
Single Girder EOT Crane specifications
| Capacity | 1 Ton to 20 Ton |
|---|---|
| Crane type | Single girder |
| Span | Made to your bay width |
| Hoist | Electric wire rope hoist |
| Operation | Pendant or radio remote |
| Safety | Overload protection, limit switches |
| Design standards | IS 807, IS 800, IS 3177, IS 4137 |
IS 3177 / IS 807 duty classification guide
Electric overhead travelling cranes are categorised into duty classes based on daily operational hours, load spectrum, and lifting cycles. Ganesh Engineering designs each crane precisely to your operational class:
| Duty Class | IS 3177 / FEM | Typical Application | Daily Working Hours | Recommended Build |
|---|---|---|---|---|
| Class I | M3 / FEM 1Bm | Maintenance shops, pump houses, standby lifting | 1 to 2 Hours | Single girder EOT crane with standard hoist |
| Class II | M5 / FEM 2m | General engineering, machine shops, warehouses | 2 to 4 Hours | Single or double girder EOT crane |
| Class III | M7 / FEM 3m | Heavy fabrication yards, foundries, steel stockyards | 4 to 8 Hours | Double girder EOT crane with heavy-duty crab |
| Class IV | M8 / FEM 4m | Steel melting shops, continuous rolling mills, power plants | 8 to 24 Hours (Continuous) | Heavy double girder with auxiliary hoist & cabin control |
Core engineering components & safety mechanisms
Bridge Girder Construction
Fabricated box girder or rolled steel beam designed to IS 800 and IS 807. Deflection ratio strictly maintained within 1/750 to 1/1000 of span under full safe working load.
End Carriages & Wheels
Heavy forged EN-8 / EN-9 carbon steel double-flanged wheels mounted on anti-friction spherical roller bearings in L-type bearing blocks with rubber buffers.
Hoisting Machinery & Wire Rope
Precision-machined grooved steel wire rope drum. High-tensile steel wire rope (6×36 / 6×37 construction) and forged steel shank hook with safety latch (IS 3815).
Braking & Drive Systems
Fail-safe electro-hydraulic thruster brakes on hoisting, cross travel, and long travel motions. S4/S5 crane-duty induction motors with Class F insulation (IP55 protection).
Electrical & Control Protection
Rotary geared limit switches for hoisting, cross/long travel two-way lever limit switches, electronic overload protection with digital display, and VFD step-less acceleration.
Single Girder EOT Cranes for industries in Surat
Industrial areas we cover in and around Surat
- Hazira
- Sachin GIDC
- Pandesara GIDC
- Palsana
- Kim and Kamrej
Surat is about 265 km by road from our works. The single girder EOT crane is fabricated and tested in Ahmedabad, dispatched in sections and assembled at your site by our installation team.
Single Girder EOT Crane manufacturer, supplier and exporter
Manufacturer in Ahmedabad
Every single girder EOT crane we sell is made at our own works at Plot No. 2601/B, Phase-IV, GIDC Vatva, Ahmedabad. Design, fabrication, assembly, painting and testing are done in-house, so we control the quality and can build to the exact dimensions of your site. Buyers are welcome to visit and inspect their order before dispatch. Learn more about us as an EOT crane manufacturer in Ahmedabad.
Supplier across Gujarat
We supply and install single girder EOT cranes in industrial estates across Gujarat, including Vadodara, Surat, Rajkot, Bharuch, Vapi and Kutch. See all single girder EOT crane supply in Gujarat.
Exporter from India
We also make single girder EOT cranes for buyers outside India and have supplied customers in 5+ countries. Export orders follow the buyer's specification and are packed for transport, with drawings for erection at site. Read more about single girder EOT crane manufacturers, suppliers and exporters in India.
How to choose the right single girder EOT crane
- Capacity: your heaviest regular lift, including slings, spreaders and lifting tackle.
- Span and runway: the distance between rail centres and the length the crane must travel.
- Lift height and headroom: the clear height under the roof decides single girder, low headroom or double girder.
- Duty: how many hours a day the crane runs and how many lifts per hour.
- Building: column and gantry girder strength to carry wheel loads.
- Control: pendant, radio remote or cabin, and whether you need VFD for smooth starts.
What is the price of a single girder EOT crane in Surat?
There is no single price for a single girder EOT crane because each one is built to order. The cost depends on capacity and span, standard or low headroom hoist, lift height, single or dual speed motors, vfd, rails and runway beams, installation and load test. Send us these details by phone, WhatsApp or the enquiry form and our engineers will prepare a written quotation with the design, delivery time and installation scope.
